Kanonbräda! Grym med plates. Favorit som åker ur samlingen för att göra plats för min Rossi Undertaker.
Bild - http://www.extremecarving.com/forum/files/lancelot.jpg
Tip-top skick, i princip bara puderåkt.
Pris 2500 plus frakt.
Nico from www.freestyler.it provided a review of the
F2 Lancelot 172 Swallowtail
The Lancelot is incredible in powder, no weight shift to rear leg, no difference between tracks and out. In the tracks you still can use it for carving with (better) really stiff softboots. Yes it is better to avoid putting too much weight on the tail, but the Lancelot, thanks to reduced length tails and “V” shaped rear cut, still keeps a good back torsional stiffness (compared to my excellent actual Nitro Supernatural 163). Carving on the edge, you can reach high speeds, thanks to 1400 mm of effective edge, F2 called it a “powdercarving” machine, but carving tight radius curves is not allowed. It is really a bx Eliminator with added big tip and swallowtails. In opposite, it is a bit larger than written on specs, about 259, and stiffer than usual (perhaps less on 2003 sandwich second and last model); obviously the edge to edge transition is not so quick for the average-footed rider (I have euro 42 –us 8,5), and maneuverability (handling) is poor if compared to a normal freeride board. Never tried it with hardboots, but I think there should not be problems (the “brother” Eliminator since 2002 was made to be ridden also with plate bindings). The board surely requires almost a medium-heavy guy (i'm 85 kg) and active riding.
F2 Silberpfeil 172, F2 Speedster RS Equipe 169, Pureboarding #two 158, Alpinepunk Woody 182, F2 Lancelot 172, F2 Spin Air 153, F2 Revo 160 , F2 Firebird 152,
Völkl Monocarver 180, Thias 183F, Sims Burner 188, Sims Burner 167